150W 10A Electronic Load 1.77inch TFT Color Display Power Battery Test Meter Voltage Current Power Discharge Monitor Tester

Specifications:Name: Electronic LoadMaterial: printed circuit boardWorking voltage: 12VDC, 1A power adapterDisplay: 1.77inch TFT displayLoad voltage: 0-150VDCLoad current: 0-10ALoad power: 0-150W (above 120V max. 60W)Wiring method: A+ V+ V- A- four-wire system, backward compatible with two-wire systemPower measurement ranges: 0-999999WhCapacity measurement ranges: 0-999999AhCooling ways: Control: 4 buttons controlOvervoltage protections: yesOvercurrent protections: yesOver-power protections: yesOver-temperature protections: yes, core temperature≥80℃ stopping loadTime limit discharge: yesPower-off data saving: yesZeroing of total data: supportedItem size: 48 * 100 * 110mm / 1.89 * 3.94 * 4.33inItem weight: 325g / 0.72lbPackage size: 90 * 110 * 120mm / 3.54 * 4.33 * 4.72inPackage weight: 530g / 1.17lbPacking List:1 * Electronic LoadThis product is a direct current CNC electronic load, with a maximum power of 150W and a maximum load current of 10A.Compared to traditional analogue electronic loads, it adopts protects first and then work mode to control the discharge, which can effectively protects the discharge power supplys from damage caused by over-limit and over-discharge.

• 1.77inch TFT color screen, with cumulative running time, core temperature with load, real time voltage, real time current, real time power, cumulative capacity, cumulative energy, stop discharge voltage, stop discharge current, and load switch status indication display function.
• Voltage, current and power overrun protections values can be set; and the stop discharge voltage and discharge time can be set.
• Multifunctional design, the system menu interface supports voltage calibration and current calibration, and support zeroing of accumulated data.
• The product works with a 12.0V1A independent power supplys, with an intelligent temperature control system controlling the work of the heat sink fan. Active cooling, when the load current ≥3A or the core temperature of ≥40 ℃, it will starts the fan.
• It adopts four-wire wiring method, the voltage measurement is not affected by the voltage drop of the wire, making the voltage measurement more accurate, when wiring, you only need to make the A+ and V+, V- and A- respectively short connection.